All Wood Doors by Lag Design®, Handcrafted Custom Wood Doors, If you can dream it... we can build it.
Fire Doors Quote or Request More Information Alphabetical Subject List

      All Wood Doors by Lag Design®

Click on individual photo to see in large format. Download Catalog or send catalog in mail







D-30
With
raised
Molding
D-15 D-22 D-44 D-18 D-32
With
raised
Molding
D-18 D-82
20, 45, 60 and 90-Minute Single or Double Entry
Positive Pressure Fire Doors
Available in the following woods: Ash, Cherry, Birch, Mahogany, White Oak, Red Oak, Poplar, Walnut and White Pine or any other wood above .32 density.
LAG DESIGN® 20-Minute Fire Doors have been classified by Warnock Hersey as a Panel Type Fire Door. The doors are approved for installation singly or in pairs with maximum size openings of: Singles 3'6" x 8'0" and Pairs 7'0" x 8'0". See Warnock Hersey directory or call toll free or visit our website www.lagdesign.com for more information.
LAG DESIGN® has available 20/45/60 and 90-Minute approved Labeled Fire Doors.
True divided 20-Minute doors are available. All Doors Comply with UBC 7-2 1997 Positive Pressure Code
All 20/45/60/90-Minute Fire Doors must be machined under a Labeling Service Program per NFPH-80-l983 requirements.
Variation in layout may be subject to Warnock Hersey approval.
Almost any door on the web site can be built as a fire door.
Whenever flame-resistant wood doors are required by codes, LAG DESIGN® Warnock Hersey International Labeled Fire Doors should be considered.

All Wood Doors by Lag Design®

LAG DESIGN® Fire Door Specifications For Interior Use Only
All Doors are Labeled for Compliance with UBC-7-2 1997 Positive Pressure Code
20-Minute 45-Minute 60-Minute 90-Minute
Maximum Size Singles 3'6" x 8' 3'6" x 8' 3'6" x 8' 3'6" x 8'
Maximum Size Pairs 7' x 8' 7' x 8' 7' x 8' 7' x 8'
Thickness 1 3⁄4"—Standard 1 3⁄4"—Standard 1 3⁄4"—Standard 1 3⁄4"—Standard
Adhesive Polyvinyl Acetate Type I Water Resistant-Standard
Polyvinyl Acetate Type I Water Resistant-Standard Polyvinyl Acetate Type I Water Resistant-Standard Polyvinyl Acetate Type I Water Resistant-Standard
Warranty Five (5) Year Standard
Lifetime Available
Five (5) Year Standard
Lifetime Available
Five (5) Year Standard
Lifetime Available
Five (5) Year Standard
Lifetime Available
Labeling Source ITS Warnock Hersey ITS Warnock Hersey ITS Warnock Hersey ITS Warnock Hersey
Maximum Raised
Panel Size
32" x 83" 32" x 83" 32" x 83" 32" x 83"
Minimum Raised
Panel Thickness
1 1⁄2" 1 3⁄4" 1 3⁄4" 1 3⁄4"
Maximum Flat
Panel Size
32" x 83" 32" x 83" 32" x 83" 32" x 83"
Minimum Flat
Panel Thickness
5⁄8" 3⁄4" 3⁄4" 1 1⁄8"
Maximum Lite Opening 1⁄4" Wire Glass Standard
Width 36" Height 89"
26" x 48" Not Available Not Available
Metal Edge & Astragal Not Needed Not Needed Not Needed Not Needed
Hardware Hinges–41⁄2" x 41⁄2" x .134 minimum butt or listed continuous hinge.
Latching Devices–Cylindrical, mortise, unit, surface vertical rods, rim exit devices, and cylinder dead bolts (in combination with approved latching devise).
Closers–Surface mounted, concealed overhead stops. (Some restrictions apply–consult factory.)
Viewers–One 1" diameter hole or two 1⁄2" diameter holes.
True Divided
Lite Door
Available Not Available Not Available Not Available
Species Any Wood Species with .32 Density
LAG DESIGN® Fire Door Options If you utilize these options (below) your doors can arrive at the job site ready for hanging.
LAG DESIGN® Prefinishing—a complete line of prefinishes on our wood species to meet all color specifications.
LAG DESIGN® Machining—ask for machining availability.
LAG DESIGN® Protective Packaging—polywrapped to protect against dirt, grease, scratches, etc.
No Intumescent Gasketing Required on Installation.
Lag Desigh Industrial Millwork Corporation
All Wood Doors By Lag Design®   

Our products and services are continually evolving. Check back often.